In addition to our full line of scissor lift tables we also specialize in standard and custom made safety bellow skirts for scissor lift tables.

For example we can make any size ranging from the standard 24" x 36" platform with a 36" raised height to the custom 12 ft x 20 ft platform with a notch in the platform requiring a 6 sided guard.

We also make roll up guards.

Bellow Skirt

Roll Up Guard

Ergonomic equipment such as Scissor Lift Tables & Work Positioners can save in personal injury claims

RSI or Repetitive Stress Injury is the fastest growing category of injuries costing business lost production time and increased worker compensation claim dollars. 

United States Bureau of Labor Statistics (BLS) states the number of nonfatal occupational injuries and illnesses reported in 2008 exceeded 3.7 Million cases. 

BLS states that sprains and strains are the most frequent nature of injuries and that the part of the body most often affected by work related injury is the shoulder and back which account for 33 percent of all injuries. 

Worker Compensation continues to be a major expense and concern for companies. 

Addressing workforce / workplace ergonomic issues will improve employee moral as well as enhancing overall worker safety. 

An investment in Ergonomic Equipment will result in reducing Repetitive Stress Injury, lost work days as well as improving worker efficiency on the job. 

Investments in Ergonomic Equipment shows the organization cares about the welfare of its most valued resource, employees! 

We had a customer who was moving product from one process to another and edge loading was a concern.

Edge loading is when the load is not evenly distributed on the lift table. When the load is concentrated on the edge of the platform the lift table can fail.

Below is a picture of a custom designed lift table with side stabilizing arms to support the platform.

Our explosion proof scissor lift tables have bronze bushings at the pivot points and the cam followers ride on brass strips. Thus, there are no steel on steel points that could cause a spark.

We also use an explosion proof power unit and hand pendent.

Call us at 828-890-1077 to get a quote on your explosion proof needs.

We had a customer that needed a large quantity of scissor lift tables. These scissor lift tables had a capacity of 6,000 lbs and had casters so the lift table could be moved. This is fairly standard but the customer needed these in 2 weeks.

We went to work and shipped the entire order on time in 2 weeks.

We stand ready to be the solution to your material handling needs.

Call us at 828-890-1077 today!

The support rods in our Safety Bellow Skirting for Scissor Lift Tables are totally enclosed with no exposed metal edges.

These support rods comes standard with all of our Bellow Skirts.

To insert the rod into the skirt start with the top convolution having one person push the rod and another person hold the skirt level. Insert one rod into each convolution. If the rod does not slide in easily apply a lubricant to the rod before inserting.

As always, Click for quote request if you need a quote for a safety bellow skirt. Fill out the form and fax to 828-890-3872

Application: This manufacturing operation handles a wide range of boxed shipments. The loads can range from several hundred to over two thousand pounds. Pallets are loaded on the floor beside each conveyor line. The completed pallets are transported by pallet jack to the shipping area.

Problem: The operators handle various size and weight of cartons in this shipping area. The area for staging and transporting the loaded pallets is very cramped. Lifting, bending, stretching and reaching to position cartons of various size and weight takes a physical toll on line operators. Lift trucks cannot access the congested work cells.

Bishamon EZOFF lifters are positioned at the end of the packing lines. The empty pallets are placed on the Lift table. The lift is lowered as the pallet is loaded to accommodate the workers comfort level. In addition the operator can rotate the platform to position the lift for loading thereby eliminating reaching across the load or walking around the lift to position cartons on the pallet. The result is less bending, reaching and stretching, reduced fatigue and improved productivity. The EZOFF has surely made the work EZ as well as improving overall efficiency for these work cells.

The RediLift is supplied with a unique soft edge.

The RediLift comes in a range of sizes and capacities

Capacities range from 2,000 to 7,000 lb capacity

The RediLift is a very economical solution to your ergonomic needs.

Call 828-890-1077 for pricing today!

Indoff, Inc. is an authorized distributor for entire Beech Engineering product line.

Beech Engineering makes wide range of Floor Cranes, Stackers, Scissor Lift Tables and Vertical Reciprocating Conveyors (VRC)

We will be adding this product line to the catalog.

Call us if you are interested in this product line before we get it posted on the website catalog.

I would like to take a moment to explain the difference between and Inside Mount & an Outside Mount for a lift table skirt.

Inside Mount:

An inside mount is normally used when the lift table is in a pit or there are space considerations around the lift table. If you do not want the folds of the skirt to extend out past the platform then you need an inside mount.

To use an inside mount you need to confirm the are no obstructions underneath the platform such as the scissor arms and the base of the lift. The base needs to be a minimum of 3" smaller on all 4 sides to allow the skirt to go down to the floor. So if you have a 36" x 48" platform your base may not be any larger than 30" x 42".

Outside Mount:

The majority of lift table skirts are an outside mount. When the folds of the skirt can go to the outside of the platform.

When the lift is in the down position the outside perimeter of the skirt is 3" larger than the platform on all 4 sides.